Pressure Washer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Pressure Washer Parts
Pressure Washer Filter- A/C Cartridge
PartSelect Number PS8987387
Manufacturer Part Number 491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this can lead to reduced performance. This air filter is approximately 4 inches wide and approximately 5 inches long. To replace the air filter, locate the air filter cover on the side of the engine, unscrew it, and remove the old filter. Be sure to clear out any dirt, clippings, or other debris that has found its way into the air filter assembly before you insert the new filter. Reattach the air filter cover, and secure it with the screws. This product is sold individually.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Barry from FRANKFORT, KY
replaced gasket that go's between the air cleaner housing and carb. cleaned housing and reinstalled with new air filter
Also replaced fuel tank , the built in fuel shut off started leaking , had to replace the tank. Ordered a new one Briggs & Stratton original equipment fit perfect . This is a 25 year old Briggs & Stratton lawn mower 3.5 HP, Runs perfect, starts by the 2nd crank every time. First time I ever had to spend money on it since I bought it new in 1991
Read more...
Pressure Washer Plug-Spark
Removed air intake and filter
Loosened and disconnected gas line to carburetor
Unscrewed carburetor and disconnected from throttle arm
Reversed process using new carburetor, O-ring and gasket Read more...
PartSelect Number PS9140427
Manufacturer Part Number 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process. Over time, spark plugs can become worn and can go bad, which will prevent the engine from firing. You can test your spark plug for continuity with a multimeter, and inspect it for corrosion if you suspect the spark plug has gone bad. This is an OEM part sourced directly from the manufacturer and it is sold individually.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
David from KNOXVILLE, TN
Replace carburetor
Loosened engine cover and moved out of the wayRemoved air intake and filter
Loosened and disconnected gas line to carburetor
Unscrewed carburetor and disconnected from throttle arm
Reversed process using new carburetor, O-ring and gasket Read more...
Pressure Washer Carburetor Overhaul Kit
Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together with all the necessary clamps. Read more...
PartSelect Number PS8984098
Manufacturer Part Number 498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Jonathan from LIBERTY TWP, OH
Smelled Gas Leaks
Inspected/removed fuel lines and found signs of leak. Removed and inspected carburetor and found that seals and gaskets were toast. Replaced said seals with ones from the kit that fit and replaced fuel lines.Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together with all the necessary clamps. Read more...
Pressure Washer Grommet
PartSelect Number PS9294797
Manufacturer Part Number 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you notice a reduction in the mower engine performance, and engine backfires, this part is likely to be in need of replacing. It can develop cracks due to fatigue, and our troubleshooting tip is to inspect this part if dark smoke is coming out of the exhaust, it is a telltale sign.
This is an easy repair to make, and does not require any tools. The new grommet attaches on the breather tube fromt he crankcase to the carburetor.
Pressure Washer Valve Plug
PartSelect Number PS9948296
Manufacturer Part Number 39-0231
The valve plug goes next to the o-ring. This part is made of metal and is sold individually. It is an authentic Mi-T-M replacement part that is sourced from the original manufacturer for use with pressure washers. It will need to be replaced if it breaks or strips.
Pressure Washer Kit-Needle/Seat
PartSelect Number PS8963322
Manufacturer Part Number 398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you may notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.
Fixes these symptoms
- Will Not Start
- See more...
Pressure Washer Bolt- Stud - H=42.5mm
PartSelect Number PS10021937
Manufacturer Part Number 90043-ZL8-000
Pressure Washer Brands
- Briggs and Stratton Pressure Washer
- Husqvarna Pressure Washer
- Snapper Pressure Washer
- Troy-Bilt Pressure Washer
Related Pressure Washer Parts
- Pressure Washer Bearings
- Pressure Washer Belts
- Pressure Washer Brackets and Flanges
- Pressure Washer Caps and Lids
- Pressure Washer Filters
- Pressure Washer Handles
- Pressure Washer Hardware
- Pressure Washer Hoses and Tubes
- Pressure Washer Knobs
- Pressure Washer Legs and Feet
- Pressure Washer Motors
- Pressure Washer Pumps
- Pressure Washer Seals and Gaskets
- Pressure Washer Spark Plugs
- Pressure Washer Springs and Shock Absorbers
- Pressure Washer Switches
- Pressure Washer Tanks and Containers
- Pressure Washer Valves
- Pressure Washer Wheels and Rollers
- Pressure Washer Wire Plugs and Connectors