Admiral Freezer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Admiral Freezer Parts
Your Price
$17.11
In Stock
Admiral Freezer Light Bulb - 120V 25W
PartSelect Number PS11747806
Manufacturer Part Number WPA3073101
This light bulb is a 120 volt, 25 watt incandescent appliance light bulb with a small base screw-in that fits in a variety of appliances such as microwaves, refrigerators, freezers, cooktops, or stoves. Its purpose is to light up the appliance when the door is open. This is a genuine OEM part. You may need to replace the light bulb if the existing bulb is burnt out or broken. This light bulb is sold individually and is a common wear part, it is recommended to order a spare.
Installation Instructions
Arau from Haverhill, MA
The door was crocked and wouldn't shut properly
Everything was easy. I read one of your other reviews and it gave me the confidence to try it myself. First i toke off the cap at the top of the door then the three screws. I lifted the door off so i could be sure the cam was my only problem then put the door back on. That took 5 mins. Then I got on the computer and ordered the parts i needed. Two days later the parts arrived and and i took the door off again. Then put the new cam on, applied a litle vasiline, put the door back on and forgot that i ever had a problem. Thanks for the help. Doug Arau
Read more...
Your Price
$133.53
In Stock
Admiral Freezer Defrost Timer
PartSelect Number PS11740630
Manufacturer Part Number WP3-81329
This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
Fixes these symptoms
- Frost buildup
- See more...
Your Price
$167.48
In Stock
Admiral Freezer Door Gasket
When it warmed up I called a repairman who said the start relay was bad and estimated $500 to replace it. I disputed this because the compressor was running. I asked him if perhaps the freon was low, he said if it was, we should dispose of the freezer.
I even asked him to take $300 to replace that relay, but he refused so I paid him his service fee and sent him on his way. Turns out even $300 would've been a ripoff.
I watched several videos on diagnosing warm freezers. I tried contacting many online parts stores but PartsSelect.com was the only one that answered and had kind and patient techs willing to explain things to me.
I tested the evaporator fan motor, which turned out to be bad. The tech recommended other parts that might also be bad so I put them all into the shopping cart, including the overload (by accident, not sure how I got that one as I did not need the overload for this repair). I did buy the relay in case the unethical repair guy was right about the relay being bad.
The parts arrived quickly and the diagrams/video supplied by this site were very helpful. I used my cell phone to take photos of everything before I started so I could put all wires back in their proper places, etc.
EVAPORATOR FAN MOTOR:
Very easy to replace. I removed the cover panel as instructed, and removed the screws holding the motor with my nutdriver. The blades slid off the motor nice and easy--I did not have to fiddle with the clip at all, just slid them off and on.
There is a third hole in the white bracket that worried me because I didn't see a corresponding third hole in the photo online of that part. But when it arrived, it did have the hole so I was able to plug it in just fine.
I removed the middle wire from the old part's white bracket NOT by pulling on it. I removed it by gently pushing an allen wrench into the hole and then the wire came out easily so it could be plugged into the new part.
Very easy overall to replace the Evaporator Fan Motor.
BI-METAL DEFROST THERMOSTAT:
Another very easy to replace part! Find the old part, unplug it and plug in the new part! Once the panel is removed to access the fan, you can hold up the new part and use it to find the old one. In this model it was easy to find.
DEFROST TIMER:
This was on the back of my freezer, in the cavity that holds the compressor. Once I located it, it was a simple thing to replace it. I used the nut driver to unscrew the screws and unplugged it, plugged in the new one, put the screws back... super simple.
START RELAY:
This was the scariest for me but turned out to be simple. I had to lie on the ground to get close enough and position a bright light so I could see everything clearly. (I'm a 60-year-old gal with poor eyesight and creaky bones!) The cell phone came in handy here to take up close photos of the assembly.
Another difficult step: grabbing the relay to pull it out. It was difficult to gain purchase on it but I finally figured it out.
A third difficulty (only for me) was pulling off the terminals without damaging the wire. I followed the video closely here, grabbed the terminals and not the wire and worked at them to pull them off. They were on very tight, difficult but I did get them off.
Installing the new relay was easy. Attach the terminals (cell phone photo of original part helped me ensure I got the right wires to the right place) and plug it in (cell phone helped again so I could line up the pins before pushing).
The old part rattled just barely -- so perhaps it WAS on its way out, but certainly not worth a $500 repair the repairman wanted! And as you will see, it was not the only thing not working in our this freezer.
The freezer started right up -- compressor humming nicely -- but after 24 hours it was only 60 degrees. At that point I called PartsSelect.com and they spent a long time with me on the phone. We decided it might be leaking freon but they don't have parts or info on adding freon.
I researched "how to add freon to your freezer" and found a great video by Vegas Romaniac on youtube.
Turns out you need to make sure your gauge has a DVA-1 adapter; the link in the youtube video sends you to an old-style gauge, so if you buy that one you'll need to go to Walmart for a DVA-1 adapter ($3).
Another issue: the green gasket in that gauge prevented it from seating properly, it took me a very long time before it finally seated and pierced the can... Read more...
PartSelect Number PS11742202
Manufacturer Part Number WP4-35260-005
Installation Instructions
Bonnie from CARLSBAD, CA
Deep Freezer leaked, warmed up to about 60 degrees, door no longer pulled shut when closing
You should know that the freezer leaked for months before it warmed up. It's not connected to water (no ice maker in it) so I figured it was ice build-up that was melting and causing the leak. When it warmed up I called a repairman who said the start relay was bad and estimated $500 to replace it. I disputed this because the compressor was running. I asked him if perhaps the freon was low, he said if it was, we should dispose of the freezer.
I even asked him to take $300 to replace that relay, but he refused so I paid him his service fee and sent him on his way. Turns out even $300 would've been a ripoff.
I watched several videos on diagnosing warm freezers. I tried contacting many online parts stores but PartsSelect.com was the only one that answered and had kind and patient techs willing to explain things to me.
I tested the evaporator fan motor, which turned out to be bad. The tech recommended other parts that might also be bad so I put them all into the shopping cart, including the overload (by accident, not sure how I got that one as I did not need the overload for this repair). I did buy the relay in case the unethical repair guy was right about the relay being bad.
The parts arrived quickly and the diagrams/video supplied by this site were very helpful. I used my cell phone to take photos of everything before I started so I could put all wires back in their proper places, etc.
EVAPORATOR FAN MOTOR:
Very easy to replace. I removed the cover panel as instructed, and removed the screws holding the motor with my nutdriver. The blades slid off the motor nice and easy--I did not have to fiddle with the clip at all, just slid them off and on.
There is a third hole in the white bracket that worried me because I didn't see a corresponding third hole in the photo online of that part. But when it arrived, it did have the hole so I was able to plug it in just fine.
I removed the middle wire from the old part's white bracket NOT by pulling on it. I removed it by gently pushing an allen wrench into the hole and then the wire came out easily so it could be plugged into the new part.
Very easy overall to replace the Evaporator Fan Motor.
BI-METAL DEFROST THERMOSTAT:
Another very easy to replace part! Find the old part, unplug it and plug in the new part! Once the panel is removed to access the fan, you can hold up the new part and use it to find the old one. In this model it was easy to find.
DEFROST TIMER:
This was on the back of my freezer, in the cavity that holds the compressor. Once I located it, it was a simple thing to replace it. I used the nut driver to unscrew the screws and unplugged it, plugged in the new one, put the screws back... super simple.
START RELAY:
This was the scariest for me but turned out to be simple. I had to lie on the ground to get close enough and position a bright light so I could see everything clearly. (I'm a 60-year-old gal with poor eyesight and creaky bones!) The cell phone came in handy here to take up close photos of the assembly.
Another difficult step: grabbing the relay to pull it out. It was difficult to gain purchase on it but I finally figured it out.
A third difficulty (only for me) was pulling off the terminals without damaging the wire. I followed the video closely here, grabbed the terminals and not the wire and worked at them to pull them off. They were on very tight, difficult but I did get them off.
Installing the new relay was easy. Attach the terminals (cell phone photo of original part helped me ensure I got the right wires to the right place) and plug it in (cell phone helped again so I could line up the pins before pushing).
The old part rattled just barely -- so perhaps it WAS on its way out, but certainly not worth a $500 repair the repairman wanted! And as you will see, it was not the only thing not working in our this freezer.
The freezer started right up -- compressor humming nicely -- but after 24 hours it was only 60 degrees. At that point I called PartsSelect.com and they spent a long time with me on the phone. We decided it might be leaking freon but they don't have parts or info on adding freon.
I researched "how to add freon to your freezer" and found a great video by Vegas Romaniac on youtube.
Turns out you need to make sure your gauge has a DVA-1 adapter; the link in the youtube video sends you to an old-style gauge, so if you buy that one you'll need to go to Walmart for a DVA-1 adapter ($3).
Another issue: the green gasket in that gauge prevented it from seating properly, it took me a very long time before it finally seated and pierced the can... Read more...
Your Price
$7.20
In Stock
Your Price
$102.89
In Stock
Admiral Freezer Refrigeration Appliance Defrost Heater
PartSelect Number PS12348390
Manufacturer Part Number W11175809
This defrost heater part number W11175809) is for refrigeration appliances.
The defrost heater melts frost from the evaporator fins during the automatic defrost cycle.
Safely store any food that could deteriorate while the power is off and unplug the appliance before installing this part. Wear work gloves to protect your hands.
Fixes these symptoms
- Frost buildup
- See more...
Your Price
$313.06
In Stock
Admiral Freezer Door Gasket - White
PartSelect Number PS11742228
Manufacturer Part Number WP4-81049-001
This white door gasket is used to make an air-tight seal for the cabinet when the door is closed.
Fixes these symptoms
- Frost buildup
- See more...
Your Price
$108.92
In Stock
Your Price
$69.59
In Stock
Admiral Freezer Grille
PartSelect Number PS11742207
Manufacturer Part Number WP4-60461-005
This grille is a manufacturer-approved replacement part used in refrigerators. It is located on the bottom front of the appliance. The grille is a rectangular plastic frame with a series of narrow, closely spaced bars. The grille acts as a protective cover for the condenser coils and other internal components of the refrigerator, to allow proper airflow for cooling. Over time, the grille can become clogged or damaged, causing the condenser coils to overheat and compromising the cooling ability of the fridge. A faulty grille will also result in contaminants entering the internal refrigerator components, increased energy consumption, and compressor failure. Therefore, it is important to replace the grille as soon as possible to prevent further damage to your appliance. Use a flathead screwdriver to pry the grille away from the refrigerator. Clean the exposed area and gently press the grille into the mounting slots until it is locked in place.
Your Price
$167.58
In Stock
Your Price
$9.69
Special Order
Admiral Freezer Appliance Types
Related Admiral Freezer Parts
Popular Admiral Freezer Models
Below are the most popular Admiral Freezer models we have. Enter your model number in the search box to find your model.
