Genuine OEM Generator Parts

Filter- A/C Cartridge – Part Number: 491588S

Your Price

$7.06

Generator Filter- A/C Cartridge

★★★★★

4 Reviews

PartSelect Number PS8987387

Manufacturer Part Number 491588S

This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this can lead to reduced performance. This air filter is approximately 4 inches wide and approximately 5 inches long. To replace the air filter, locate the air filter cover on the side of the engine, unscrew it, and remove the old filter. Be sure to clear out any dirt, clippings, or other debris that has found its way into the air filter assembly before you insert the new filter. Reattach the air filter cover, and secure it with the screws. This product is sold individually.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

David from KNOXVILLE, TN

Replace carburetor

Loosened engine cover and moved out of the way
Removed air intake and filter
Loosened and disconnected gas line to carburetor
Unscrewed carburetor and disconnected from throttle arm
Reversed process using new carburetor, O-ring and gasket Read more...

Your Price

$4.99

Generator Plug-Spark

★★★★★

1 Review

PartSelect Number PS9140427

Manufacturer Part Number 796112S

This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process. Over time, spark plugs can become worn and can go bad, which will prevent the engine from firing. You can test your spark plug for continuity with a multimeter, and inspect it for corrosion if you suspect the spark plug has gone bad. This is an OEM part sourced directly from the manufacturer and it is sold individually.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Barry from FRANKFORT, KY

replaced gasket that go's between the air cleaner housing and carb. cleaned housing and reinstalled with new air filter

Also replaced fuel tank , the built in fuel shut off started leaking , had to replace the tank. Ordered a new one Briggs & Stratton original equipment fit perfect . This is a 25 year old Briggs & Stratton lawn mower 3.5 HP, Runs perfect, starts by the 2nd crank every time. First time I ever had to spend money on it since I bought it new in 1991 Read more...

Your Price

$3.99

Generator Nut-Lock, Ni

PartSelect Number PS8953555

Manufacturer Part Number 3296-42

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

Carburetor Overhaul Kit – Part Number: 498260

Your Price

$17.96

Generator Carburetor Overhaul Kit

★★★★★

4 Reviews

PartSelect Number PS8984098

Manufacturer Part Number 498260

This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carburetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Jonathan from LIBERTY TWP, OH

Smelled Gas Leaks

Inspected/removed fuel lines and found signs of leak. Removed and inspected carburetor and found that seals and gaskets were toast. Replaced said seals with ones from the kit that fit and replaced fuel lines.

Would be nice to have a fuel line kit with the big fuel line (tank to carb) and the little one (carb to engine) together with all the necessary clamps. Read more...

Spark Plug Bpm-8Y – Part Number: 15901019830

Your Price

$3.99

Generator Spark Plug Bpm-8Y

★★★★★

1 Review

PartSelect Number PS9263506

Manufacturer Part Number 15901019830

This Spark Plug Bpm-8y is a silver and white OEM part. Made of steel and ceramic it is individually sold, and is an electrical part. It is installed with a spark plug socket and is rated as Easy to install. It is attached inside of the cylinder head, and is used to ignite the air fuel mixture inside the combustion chamber. You can clean the spark plug with a fine sandpaper of 180 or more, then spray it with carburator cleaner and wipe dry. However, even after regular maintenance, spark plugs need to be changed as part of good engine fine-tuning. Regap to manufacturer specifications. Refer to your owners manual or model number to ensure you are choosing the correct product. Note: If your engine has more than one cylinder and sounds like it has a miss, you can remove each spark plug wire one at a time to find the miss. If the engine drops in rpm when you remove the wire, then that cylinder is fine, if it does not drop then you have found your miss!

Your Price

$5.34

Generator Grommet

★★★★★

2 Reviews

PartSelect Number PS9064851

Manufacturer Part Number 692187

This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and is black in color. You must purchase this part individually. Your grommet may require replacing if you notice dark smoke coming out of the exhaust. This is a telltale sign that your grommet has become cracked and damaged. Other symptoms are a reduction in the mower performance, or a backfiring engine. According to our customers, this is an easy repair. It requires no tools. Simply attach the grommet to the breather tube from the crankcase to the carburetor.

Diaphragm-Carburetor – Part Number: 270026

Your Price

$3.99

Generator Diaphragm-Carburetor

★★★★★

3 Reviews

PartSelect Number PS8937201

Manufacturer Part Number 270026

This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and wear, and if it is broken you may notice your engine is running rough or not starting. If your engine exhibits these signs of being starved of fuel, your diaphragm is damaged and needs to be replaced. Our customers found this repair to be of medium difficulty. It requires a wrench, screwdriver, and pliers to complete. You will be able to locate your diaphragm inside the carburetor itself to swap it out with your new one.

Installation Instructions

Gerald from MAULDIN, SC

Replace fuel diaphragm, fuel pickup tube and air cleaner

This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble. Read more...

Your Price

$5.34

Generator Grommet

★★★★★

1 Review

PartSelect Number PS9294797

Manufacturer Part Number 692189

This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you notice a reduction in the mower engine performance, and engine backfires, this part is likely to be in need of replacing. It can develop cracks due to fatigue, and our troubleshooting tip is to inspect this part if dark smoke is coming out of the exhaust, it is a telltale sign. This is an easy repair to make, and does not require any tools. The new grommet attaches on the breather tube fromt he crankcase to the carburetor.

Your Price

$48.44

Generator Wheel

PartSelect Number PS11873318

Manufacturer Part Number 0L2261

Your Price

$6.91

Generator Kit-Needle/Seat

★★★★★

1 Review

PartSelect Number PS8963322

Manufacturer Part Number 398188

This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you may notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.

Fixes these symptoms

Will Not Start
See more...

Top Appliance Brands

Top Lawn Equipment Brands

Top Appliances

Top Lawn Equipment

Generator Parts

Popular Generator Parts

Generator Brands

Related Generator Parts

Popular Generator Models

Troubleshooting at your fingertips

Generator Parts

Find Your Part

Popular Generator Parts

Generator Brands

Related Generator Parts

Popular Generator Models

Troubleshooting at your fingertips