Official Dehumidifier Parts | Order Today, Ships Today

Videos!

Your Price

$10.90

Dehumidifier LENS

★★★★★

7 Reviews

PartSelect Number PS16218465

Manufacturer Part Number 5304524341

The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing light bulb lens. Be sure to remove all broken glass, if applicable, before installing the new lens. It is recommended to check the state of the light bulb while the lens is off. This part is made of glass. The lens is a genuine Frigidaire part, sourced directly from the manufacturer, and is sold individually.

Installation Instructions

Jim from Harrison, MI

Lower baking element would not heat up.

Your online instructions said to remove the two screws and pull out the heating element about 3 inches and disconnect. When I did this the element came out but not where it was connect to the wire., I could not locate the wire from the front of the oven. I then pulled out the oven from the built in cabinet and removed the rear panel. Then inserted the element with the 2 screws from the front and connect the wires to the element from the back of the oven. Jim Read more...

Videos!

Your Price

$11.80

Dehumidifier Hose Clamp

★★★★★

1 Review

PartSelect Number PS11743008

Manufacturer Part Number WP596669

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.

Fixes these symptoms

Leaking
See more...

Installation Instructions

jeff from lindenhurst, IL

Washing Machine was leaking water

Loosened the hose clamp, removed the injector valve and injector nozzle assembly, replaced both and tightened with new hose clamp. Fixed the problem for less than $20!! Washing machine is 20 years old and this was the first problem--hopefully it is now good for another 20 years! Read more...

Water Bucket Float – Part Number: WK11X10007

Your Price

$18.63

Dehumidifier Water Bucket Float

★★★★★

16 Reviews

PartSelect Number PS3512331

Manufacturer Part Number WK11X10007

This is a float manufactured to fit into your dehumidifier. When the dehumidifier is in use and water is being absorbed from the air, the float detects the water level in your dehumidifier water bucket. When the appliance detects that the water bucket has reached its maximum level, it shifts the float switch to stop the appliance from dehumidifying so the bucket will not overfill. If your bucket has been underfilling or overfilling, you may need to replace this switch. This float is white in color and made entirely of plastic. This is a genuine replacement part sourced directly from the manufacturer.

Fixes these symptoms

Unit says bucket is full when it isn’t
Won’t stay on
See more...

Installation Instructions

Paula from HILLSBORO, OH

Support prong broke on float

1st of all, glued the broken prong that secured the float. Worked temporarily before breaking again. Started to trash the dehumidifier then looked online using the Model number. Parts select appeared thru the search and to my surprise, the part was available for under $20.00.

Ordered part and replaced it with ease. Works great! Read more...

Compressor Start Relay – Part Number: 216594300

Your Price

$22.66

Dehumidifier Compressor Start Relay

PartSelect Number PS426380

Manufacturer Part Number 216594300

The compressor start relay attaches to the compressor in your refrigerator. If your refrigerator will not start, one of the most common parts to fail is the compressor start relay. Sometimes called the controller, this device is used to boost the compressor until the unit is running. Other common symptoms connected to start relays include: refrigerator will not start, will not cool, is making a clicking, humming or buzzing sound, or the compressor itself is warm to the touch. You may also smell a burnt plastic odor if the relay has failed. Shake the relay and listen for any rattling, as this is a sign that it is faulty.

Fixes these symptoms

Will Not Start
Won’t start
See more...

Installation Instructions

Linda from Gurnee, IL

The compressor would not run.

I removed the cover, used a multimeter to test the compressor circuit, and found the compressor start relay to be defective.
Ordered a new one and installed it when it arrived. Read more...

FILTER Assembly – Part Number: WK85X21721

Your Price

$8.06

Dehumidifier FILTER Assembly

★★★★★

1 Review

PartSelect Number PS12172022

Manufacturer Part Number WK85X21721

Your Price

$21.83

Dehumidifier Drain Adapter

★★★★★

7 Reviews

PartSelect Number PS11724131

Manufacturer Part Number 5304502644

Compressor Mounting Grommet – Part Number: 216498900

Your Price

$10.90

Dehumidifier Compressor Mounting Grommet

PartSelect Number PS426002

Manufacturer Part Number 216498900

Overload Protect – Part Number: 6750U-L039A

Your Price

$16.86

Dehumidifier Overload Protect

PartSelect Number PS3529566

Manufacturer Part Number 6750U-L039A

Silicone Rubber Adhesive - 2 oz – Part Number: WP279368

Your Price

$51.96

Dehumidifier Silicone Rubber Adhesive - 2 oz

PartSelect Number PS11740605

Manufacturer Part Number WP279368

Silicone rubber adhesive is a high temperature adhesive that is used for gaskets on dryers and felt seals. It is used on many different appliances for many different application reasons. This silicone paste creates a waterproof seal between components. This product is a 2 oz. tube. Unplug your appliance if you will be working on any internal workings and applying this sealant. Wear gloves to protect your hand from accidently applying sealant to your skin. The surface must be clean, dry, and free from oil and grease. Coat one surface and let it dry for at least one minute and then bond.