Frigidaire Dryer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Frigidaire Dryer Parts
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
- Drum Not Spinning
- Marks left on clothes
- Noisy
- See more...
1. Removed the cover from the back of the dryer (held in place via two phillip head screws)
2. Pushed down on the idler assy and removed the idler spring to release the drum belt.
3. Inserted flat tip screwdriver between the top panel and the dryer main body in the front of the dryer to pry the top loose from the two retaining clips.
4. used phillips screwdriver to remove the two retaining screws (one left, one right) that hold the front panel to the main body of the dryer. (about a foot down from the top of the dryer).
5. disconnected the wiring plug on the top right hand side at the top of the dryer.
6. lifted the front panel slightly removing it from the main body and placed it to the side.
7. lifted the rear of the drum to release it from the bearing bracket and removed the drum belt.
8. Pulled the drum through the front of the dryer body and moved it to an open work area.
9. Reached into the Dryer and loosened the two
bearing bracket screws with a nut driver. Here's where another pair of hands would have come in handy. Holding the ground bar on the back of the drum with on hand, reached into the dryer and finished removing the bracket screws somehow managing not to drop the tiny grounding ball (size of a BB) Removed the badly damaged plastic bracket, grounding bar, and grounding ball and set
them aside to be discarded later.
10. Used impact driver with phillips attachment to remove two of the three screws that hold the bearing to the back of the drum (these are on the inside) The third screw's head stripped out and I had a very difficult time removing it. Had it not been for that, the job would have taken less than an hour.
11. I had my wife hold the bearing in place while I started the three retaining screws.
12. My wife also got behing the dryer and held the grounding bar in place while I installed the new bearing bracket . (this kept me from loosing the grounding ball)
I just reversed the rest of the procedures to install the drum belt, drum, front panel, etc.
The dryer works like new now, doesn't squeal.
Also replaced the on/off switch knob (just pulled the old one from the stem and slid the new one on. Read more...
- Drum Not Spinning
- Noisy
- See more...
- Noisy
- See more...
So does this work? Yes, the parts fit just fine and they improve the situation a great deal but they don't completely solve it if you have a dog that has those little short sharp hairs and the dog sleeps in your bed, sits on your lap and leaves dog hair all over stuff that will be washed and put into the dryer. Those hairs will still get past the new clam shell filter but the good news is, you don't have to pull the dryer apart to clean the fan blades after you have installed these new parts. You can take the hose from your vacuum cleaner and just stick it in the fan blade compartment (after removing clamshell lint screen) and you will be able to capture most of what got past the screen. How is this different than before? The kind of lint that makes it past the new parts is much lighter and finer than what got past the old screen so the vacuum can easily pull it out.
PS I love Parts Select. This is the second thing I've ordered from them and I've been so impressed with how fast the parts arrived and how nicely they were packed. It's a first class organization in my opinion. Read more...
- Marks left on clothes
- Noisy
- See more...
What I would add to previous reviews is to pull the front off or the little acces grill in back and check to see what kind of belt you have. According to the model #, It showed the wide flat belt when in fact I had the smaller ribbed belt. Glad I checked before ordering.
A few things that will make your life easier is once you have the old upper guide/seal removed, put down the glue then use several med sized plastic spring clamps to hold the seal in place while the glue sets up, (@ 20-30 min). Their cheap and you should have some around anyway. When replacing the seals I would go ahead and replace the belt too. It's cheap and if your machine is 5+ yrs old probably is worn. Total cost of repair was about $60 (inc shipping). Took about 1 hr 20 min total time. Most of that time was scrapping the old seal material/ glue off the dryer front. Actual disassembly and repair maybe 1/2 hour. Other little tip is the clips for the lid of dryer is to use a flat screwdriver and gently push straight in until it's compressed enough to release the lid, it will pop up when pushed in far enough. That one took me a while to figure out.
Thanks to Part Select for such a helpful site. My dryer is like new again. Read more...
- Marks left on clothes
- Noisy
- See more...
- Drum Not Spinning
- Noisy
- See more...
- Leaking
- See more...
- Element will not heat
- Little to no heat when baking
- Little to no heat when broiling
- See more...
- Marks left on clothes
- Noisy
- See more...
Frigidaire Dryer Appliance Types
Related Frigidaire Dryer Parts
- Frigidaire Dryer Seals and Gaskets
- Frigidaire Dryer Elements and Burners
- Frigidaire Dryer Hardware
- Frigidaire Dryer Knobs
- Frigidaire Dryer Thermostats
- Frigidaire Dryer Switches
- Frigidaire Dryer Doors
- Frigidaire Dryer Panels
- Frigidaire Dryer Circuit Boards and Touch Pads
- Frigidaire Dryer Timers
- Frigidaire Dryer Brackets and Flanges
- Frigidaire Dryer Hoses and Tubes
Popular Frigidaire Dryer Models
Below are the most popular Frigidaire Dryer models we have. Enter your model number in the search box to find your model.
- GLER341AS2 Residential
- GLER331AS2 Residential
- GLEQ2152ES0 Residential
- FEQ332ES0 Residential
- GLER642AS3 Residential
- GLEQ2152ES1 Residential
- GLEQ642AS2 Residential
- GLEQ332AS2 Residential
- AEQ6000ES2 Residential
- FDE336RES2 Residential
- FASE7073LW0
- FEQ332CES0
- FER641FS0 Residential
- FSE447GHS0 Residential
- FAQE7001LW0
- FSE748GFS1 Residential
- LEQ2152ES0 Residential
- FASE7073LA0
- GLER341AS1 Residential
- LEQ332DS0 Residential