Husqvarna Dethatcher Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Husqvarna Dethatcher Parts
HINT: I removed the mower deck and placed jack stands under the frame to support the rear end of the mower. I then supported the transaxle with a floor jack. This worked great for positioning/aligning the transaxle up to the frame after the new mounting bracket was installed.
HINT: Due to the shearing of the transaxle mounting bracket, it was difficult to get a socket to seat correctly on the some of the nuts securing the transaxle to the mounting bracket. I highly recommend getting 4 new nuts because you will likely damage/strip the nut while removing it.
HINT: The youtube videos all show removing the rear tires. The rear tires can be difficult to remove; and there are some interesting youtube videos on removing stuck rear tires. If you have a stuck rear tire, you can complete the repair with the tires on; it is just a bit more challenging to squeeze your hands behind the tire to reach the bolts. I was able to only get one tire off.
HINT: If I wasn't able to do the repair with the rear tire on, my idea for getting the rear tire off was to fabricate a bracket that would work with a gear puller. The plan was to utilize the two symmetrical 1/4 inch-ish size holes in the rim to install 12" long bolts. I would then install a C-channel over the bolts, which would place the C-channel directly over the axle. I would then drill a hold in the C-channel for the gear puller bolt to go through. The shoulders of the gear puller bracket would then push against the c-channel. I was planning on using a few large fender washers on the back side of the rim to help prevent the rim from getting damaged when pulling the tire. You will be pulling the rim about 3 inches to get it off the axle.
HINT: It look four hours to repair plus another half hour of watching youtube videos; probably would have taken two hours if I didn't spend two hours trying to take off one of the rear tires that was stuck.
HINT: Since I was working under the mower, I also replaced the drive (motion) belt as preventative maintenance. Read more...
Husqvarna Dethatcher Appliance Types
Related Husqvarna Dethatcher Parts
- Husqvarna Dethatcher Agitators
- Husqvarna Dethatcher Brackets and Flanges
- Husqvarna Dethatcher Handles
- Husqvarna Dethatcher Hardware
- Husqvarna Dethatcher Knobs
- Husqvarna Dethatcher Pulleys
- Husqvarna Dethatcher Springs and Shock Absorbers
Popular Husqvarna Dethatcher Models
Below are the most popular Husqvarna Dethatcher models we have. Enter your model number in the search box to find your model.
- DT20 Dethatcher
- DT22HNR Dethatcher
- 580 580 Series Dethatcher Kit (1999-12)
- DT22H5NRA Dethatcher
- DT22HF Dethatcher
- DT18 Power Rake
- DT22H5FA Dethatcher
- DT22NEFA Dethatcher
- DTH20A Dethatcher
- DTF22 Dtf 22 (966068401) (2010-02)
- DT22NF Dethatcher
- SD18 Power Rake
- DT22B5NRA Dethatcher
- 606000001 580 Series Dethatcher Kit
- DT18BF Dt 18 Bf (966067001) (2010-02)
- DTF6 Dtf 6 (Bf) (966067201) (2010-02)
- DT22BDS Dethatcher
- 600SERIES 600 Series Dethatcher Kit (1999-12)
- DT22B5FA Dethatcher
- DTF226 Dtf 226 (966068501) (2010-02)