Kawasaki Edger Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Kawasaki Edger Parts
Your Price
$5.13
In Stock
Kawasaki Edger Grommet,Fuel Tank
PartSelect Number PS9156129
Manufacturer Part Number 92071-2142
The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or damaged, it will begin to leak fuel, and must be replaced. Refer to your make, model and diagrams to ensure you're choosing the right part.
Your Price
$47.34
In Stock
Your Price
$12.82
In Stock
Kawasaki Edger Pump-Priming
PartSelect Number PS8977546
Manufacturer Part Number 49043-2067
The Primer, or priming pump, is a plastic part that attaches to the carburetor. It's rated as "Easy" to install by most of our customers. This part is used to pump fuel from the fuel tank to the carburetor or to start the engine. If damaged, it will no longer pump fuel. It may also be physically, noticably broken. Replace this part if damaged. Check your make, model and diagrams to ensure you're choosing the right part.
Your Price
$7.95
In Stock
Kawasaki Edger Cap-Assembly-Tank
PartSelect Number PS8998548
Manufacturer Part Number 51048-2078
The Fuel Cap Assembly, is a black, plastic cap that keeps fuel inside the tank, and debris out. If broken, fuel will begin leaking out and it must be replaced. Installation is rated as "Easy", the part simply attaches on top of the fuel tank. Refer to your make, model, and diagram to ensure this is the correct part.
Your Price
$21.60
In Stock
Kawasaki Edger Cap-Tank And Breather,Assembly
PartSelect Number PS10038870
Manufacturer Part Number 99996-6101
The Fuel Tank Cap and Breather is an assembly made up of black plastic parts. You'll know if you need a new one if fuel is leaking, and this appears to be the source. This can happen due to normal wear, fatigue, and damage. This kit is rated as "Easy" to install and attaches to the fuel tank. Refer to your make, model and diagrams to ensure you're choosing the right part.
Your Price
$39.78
In Stock
Your Price
$6.29
In Stock
Your Price
$45.92
In Stock
Your Price
$7.59
In Stock
Kawasaki Edger Spring, Recoil
PartSelect Number PS9159621
Manufacturer Part Number 92145-2128
A recoil spring, also known as a recoil starter spring, is a tightly wound spring that is designed to be pulled and used within startup mechanisms of various models of outdoor power equipment, such as trimmers, edgers and leaf blowers. The spring is one part of a whole system, including a pulley and spool which is what a user will pull, before the recoil spring retracts it. This recoil spring is compatible with various makes and types of power equipment, and is sold as an individual OEM part, without any other hardware. This spring measures approximately 3/4-inch when wound and is made of high-quality metal. If you notice that your starter mechanism is not retracting properly, or does not have enough tension on it, the spring may be worn out or broken, which can happen over time and through normal wear and tear. Depending on your equipment, the replacement process will look different for this spring, so reference your user manual for the exact location.
Your Price
$11.30
In Stock
Kawasaki Edger Element-Air Filter
PartSelect Number PS9880815
Manufacturer Part Number 11013-2245
This air filter is designed for use with various makes and models of small engine lawn equipment and is an individual part. Designed to prevent unwanted dust and debris from entering the carburetor and engine, this air filter can be replaced by simply removing the filter cover and swapping the old for the new. If your equipment has poor performance, it is recommended you swap the air filter as a clogged filter can lead to decreased air in the engine, resulting in a loss of power. When replacing, be sure to read the manual for your model for exact placement and rub a small amount of oil into the filter before installing it.
Kawasaki Edger Appliance Types
Related Kawasaki Edger Parts
- Kawasaki Edger Brackets and Flanges
- Kawasaki Edger Caps and Lids
- Kawasaki Edger Carburetors
- Kawasaki Edger Filters
- Kawasaki Edger Seals and Gaskets
- Kawasaki Edger Springs and Shock Absorbers
- Kawasaki Edger Valves
- Kawasaki Edger Wheels and Rollers
Popular Kawasaki Edger Models
Below are the most popular Kawasaki Edger models we have. Enter your model number in the search box to find your model.
- KEL27B Kawasaki Edger Model KEL27B/A4 Parts
- KEL27B Kawasaki Edger Model KEL27B/A6 Parts
- KEL27B Kawasaki Edger Model KEL27B/A1 Parts
- KEL27B Kawasaki Edger Model KEL27B/A5 Parts
- KEL27B Kawasaki Edger Model KEL27B/A3 Parts
- KEL27B Kawasaki Edger Model KEL27B Parts
- KEL26A Kawasaki Edger
- KEL26A Kawasaki Edger Model KEL26A Parts
- KEL27BC Kawasaki Edger Model KEL27BC/A1 Parts
- KEL27BC Kawasaki Edger Model KEL27BC Parts
- KEL27BC-AS01 Edger
- HE026A-AS01 Edger
- KEL27B-AS00 Edger
- HE026A-AS00 Edger
- HE027A-AS01 Edger
- KME01A-A1 Kme01a-A1 Multi-Task Series Edger
