MTD Tiller Parts

Carriage Bolt, 5/16-18 x .75 – Part Number: 710-0451

Your Price

$3.99

PartSelect Number PS10001568

Manufacturer Part Number 710-0451

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

Nut, Flange Lock, 5/16-18, Grf – Part Number: 712-04063

Your Price

$3.99

MTD Tiller Nut, Flange Lock, 5/16-18, Grf

PartSelect Number PS9092936

Manufacturer Part Number 712-04063

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Chute Flange Keeper – Part Number: 731-0851A

Your Price

$4.99

MTD Tiller Chute Flange Keeper

★★★★★

1 Review

PartSelect Number PS10005747

Manufacturer Part Number 731-0851A

This chute flange keeper is sourced from the original equipment manufacturer for use in snowblowers. The plastic keeper allows the snowblower chute to pivot, and secures the flange that connects the chute to the blower frame and holds it in place during use. Over time the flange keeper can break or fall off, which causes the chute to dislodge or shift from its position. If you notice that debris is discharged in the wrong direction, and you have difficulties adjusting the chute then this is a sign that the flange keeper is no longer functioning as it should. Clean the chute flange and surrounding area before placing the new keeper on. Use a pair of pliers to align the the holes on the flange keeper with the holes on the chute and lock it in place.

Cable Barrel Holder – Part Number: 946-0605

Your Price

$4.99

MTD Tiller Cable Barrel Holder

★★★★★

1 Review

PartSelect Number PS9167431

Manufacturer Part Number 946-0605

This cable barrel holder is a genuine OEM part that is designed for use with tillers and snow throwers. Sold as an individual part, this holder measures approximately 1-inch in length and is used to secure the clutch control handle and cable together. This holder is made of durable plastic and can replace the old holder by simply removing it, inserting the cable into the new holder, and tightening it until it is locked in place.?

Your Price

$11.25

MTD Tiller Dust Cap

PartSelect Number PS9173723

Manufacturer Part Number 931-0487

This OEM dust cap prevents dust from entering the shaft and surrounding area of your tiller. This part is black, sold individually, and made out of plastic. Due to damage from ongoing use, this part can become broken or get knocked off entirely and go missing, which you will notice, as it attaches to the outside of the tiller gear housing. This is an easy repair that only requires a hammer to make. Please note that you will need to purchase a rubber seal alongside the dust cap when making this repair, part number 921-0175.

Your Price

$3.99

MTD Tiller Air Filter

PartSelect Number PS9117898

Manufacturer Part Number 753-05996

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...

Your Price

$7.48

MTD Tiller Bearing

PartSelect Number PS9164778

Manufacturer Part Number 931-0374

The flange sleeve bearing, also known just as the bearing, is sold individually, and assists the tine shaft rotation on your tiller by reducing friction between the moving parts and securing their positioning. Because of this function, this part can wear easily and requires regular replacement. This part is OEM, black in color and made of metal. If the shaft becomes loose within the tiller housing, and you notice noise coming from it, it is likely that you need to replace this bearing. Most customers rated this as a moderately easy repair, which requires a screwdriver, pliers, a socket set, wrench driver, and nutdriver.

Fuel Return Line – Part Number: 791-181086

Your Price

$6.77

MTD Tiller Fuel Return Line

★★★★★

2 Reviews

PartSelect Number PS9137685

Manufacturer Part Number 791-181086

The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you will know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.

Bearing .62" I.D. x 1.38" O.D. x .437" Thk. – Part Number: 941-0155

Your Price

$24.15

MTD Tiller Bearing .62" I.D. x 1.38" O.D. x .437" Thk.

PartSelect Number PS9167498

Manufacturer Part Number 941-0155

This authentic OEM bearing measures 0.62 inches inside diameter, and 1.38 inches outside diameter, and is 0.436 inches thick. Silver and balck in color and sold individually, the bearing is comprised of steel and rubber. This bearing allows the input shaft to rotate freely inside the gear box, and over time can become worn or damaged. You will know your bearing is damaged if it is making a growling, grinding, or squealing sound. This is an easy repair, and requires a bearing puller tool to carry out. Locate the bearing inside the gear box on each end of the input shaft, ensuring you have confirmed this is the part you need by verifying your model number or using your owners manual.

Fuel Line and Filter – Part Number: 791-682039

Your Price

$15.94

MTD Tiller Fuel Line and Filter

★★★★★

2 Reviews

PartSelect Number PS10014709

Manufacturer Part Number 791-682039

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part of proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Howard from NEWBURGH, IN

Dry rot hoses

Took off old and new parts went right in place. Read more...

Top Appliance Brands

Top Lawn Equipment Brands

Top Appliances

Top Lawn Equipment

Popular MTD Tiller Parts

MTD Tiller Appliance Types

Related MTD Tiller Parts

Popular MTD Tiller Models

Troubleshooting at your fingertips

MTD Tiller Parts

Find Your Part

Popular MTD Tiller Parts

MTD Tiller Appliance Types

Related MTD Tiller Parts

Popular MTD Tiller Models

Troubleshooting at your fingertips