Poulan Tiller Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Poulan Tiller Parts
Your Price
$3.99
In Stock
Poulan Tiller Clevis Pin
PartSelect Number PS9009427
Manufacturer Part Number 532132673
This clevis pin is an OEM replacement part that is compatible with various makes and models of tiller and is sold as an individual part. The purpose of this pin is to snap or break under a certain amount of pressure if your tiller is jammed, to protect the more valuable components of your tiller. Measuring at approximately 2-inches long and made of high-quality metal, replacing this pin should only require pliers to swap out the old pin for the new.
Your Price
$3.99
In Stock
Poulan Tiller Clip, Hairpin
PartSelect Number PS9007536
Manufacturer Part Number 532003146
This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1.5 inches long. The clip acts as a fastener to prevent the moving parts from loosening and falling off during usage. The clip is vulnerable to corrosion and general wear over time. However, it can also fail prematurely due to overloading and excessive stress. A damaged hairpin clip will result in misalignment of parts, accidental disassembly, increased friction and wear, and potential harm to the user. Remove the faulty pin and align the new one with the insertion points. Ensure that the pin is securely fitted in its appropriate slot and compress the ends to prevent it from dislodging.
Your Price
$3.99
In Stock
Your Price
$13.69
In Stock
Poulan Tiller Belt, V
PartSelect Number PS17016528
Manufacturer Part Number 591372401
Belt, V
Installation Instructions
David from WINSTON SALEM, NC
Your Price
$6.21
In Stock
Poulan Tiller Rivet Rd Hd Drilled 3/8 Dia
PartSelect Number PS9285897
Manufacturer Part Number 532126875
Your Price
$7.87
On Order
Poulan Tiller Bearing, Shaft, Ground Drive R.H.
PartSelect Number PS9016290
Manufacturer Part Number 532143008
Your Price
$34.86
On Order
Poulan Tiller Cable, Clutch
PartSelect Number PS9011918
Manufacturer Part Number 532159231
This clutch cable is designed for use with various models of tillers, and is constructed of metal, with a durable plastic insulation. The purpose of this cable is to control the primary drive function of your equipment, so when it is engaged, the tiller moves, and when it is disengaged, the tiller stays stationary. This cable is connected to a lever on the handlebar, and to a mechanism on the engine, with the cable acting as the connector. If your equipment has issues with engaging the clutch, or if the cable is frayed and damaged, the cable needs to be replaced. To replace this cable, use a screwdriver or wrench to disconnect it from the lever, before removing it from the engine mechanism. Then simply install the new one where the previous one was connected.
Your Price
$16.18
On Order
Poulan Tiller Tine, Inner, L.H.
Remove guard shield.
Remove old cable.
Install new cable.
Adjust throw on cable.
Put all parts back and test Read more...
PartSelect Number PS9285516
Manufacturer Part Number 532006554
Installation Instructions
David from SKANDIA, MI
Spring on clutch cable broke
Remove L. wheel.Remove guard shield.
Remove old cable.
Install new cable.
Adjust throw on cable.
Put all parts back and test Read more...
Your Price
$6.21
In Stock
Your Price
$95.89
In Stock
Poulan Tiller Kit, Bearing
PartSelect Number PS9013186
Manufacturer Part Number 532165140
This OEM kit includes all the necessary hardware, including new bearings, oil and rubber seals, and rivets, to replace the tine shaft bearings on your tiller or cultivator. The tine shaft bearings support the tine shaft inside the gear case of your machine. If the bearings are damaged, you may experience rattling or squeaking noises, excessive vibrations, and difficulties in maneuvering. Uneven tilling or cultivating is a clear indication that the bearings need replacement. To locate and replace your tine shaft bearings, consult your user guide as they can be found on either side of the tine shaft. It is commonly found inside the gear case. You will need to remove any retaining rings holding the bearings in place with pliers or screwdriver. You may need to use a penetrating oil if the bearings are stubborn. Please note that this kit is sold separately from the tine shaft.
Poulan Tiller Appliance Types
Related Poulan Tiller Parts
- Poulan Tiller Bearings
- Poulan Tiller Belts
- Poulan Tiller Blades
- Poulan Tiller Brackets and Flanges
- Poulan Tiller Control Cables
- Poulan Tiller Handles
- Poulan Tiller Hardware
- Poulan Tiller Latches
- Poulan Tiller Seals and Gaskets
- Poulan Tiller Springs and Shock Absorbers
- Poulan Tiller Transmissions and Clutches
- Poulan Tiller Wheels and Rollers
Popular Poulan Tiller Models
Below are the most popular Poulan Tiller models we have. Enter your model number in the search box to find your model.
- HDF550 5.5HP Front Tine Tiller
- FT900 Tiller 2010-03
- HDF900 Front Tine Tiller
- HDF900 Front-Tine Tiller
- HDF900 Front-Tine Tiller
- HDF900 Front Tine Tiller
- HDF900 Tiller
- HDF900 Tiller
- HDF900 Front-Tine Tiller
- HDR500K 17In. Tiller
- RJ500C Husqvarna RJ500C (1999 and Before) 5HP 17" Tiller
- PPFT35C Pro Tiller
- PPFT3C Pro Tiller
- PPFT35 Pro Tiller
- FT35 Front-Tine Tiller
- PPFT35A Pro Tiller
- PPRT8J Pro Tiller
- RT900 Front Tine Tiller
- VF550 Front Tine Tiller
- PPRTJA Pro Tiller
