Samsung Microwave Oven Combo Parts

Samsung Microwave Oven Combo Door Key

★★★★★

★★★★★

16 Reviews

The microwave door key (or door latch) ensures that the microwave door closes properly while the microwave is operating. If the door key is broken, the door will not close and the microwave will not start. If you notice that the microwave door is not staying closed, check to ensure that the door key is in working order and is not damaged. This door key is made of plastic and has a spring attached to provide downward tension to keep the hooks engaged. If either of the hooks is broken or does not have any spring tension, you may need to replace the door latch. Before beginning this repair, make sure to unplug the unit and remove the inner door panel to access the door key. This part is also known as a door latch.

Samsung Microwave Oven Combo Oven Burner Igniter

★★★★★

★★★★★

12 Reviews

This is an oven burner igniter made for use with Samsung ovens. This oven burner igniter is designed to ignite the gas that flows into it, to produce heat. However, over time and with further frequent use or food contamination, this burner can fail and will need to be replaced. If your burner is glowing red or orange, it is functioning as intended, but if your oven does not heat up properly, it likely needs replacement. This oven burner igniter is an OEM part that comes by itself and does not come with any of the screws necessary to secure it inside your oven.

Samsung Microwave Oven Combo Micro Door Switch

★★★★★

★★★★★

10 Reviews

This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the door is open/closed. This ensures that the microwave only operates when the door is securely shut and switches off as soon as the door is open. Over time, this switch can become worn out or damaged. A faulty door switch can result in failure to switch the microwave on/off, lack of heat, and running with the door open. To confirm that the door switch is faulty, use a multimeter to test for electrical failure. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.

Samsung Microwave Oven Combo Range Surface Burner Knob

★★★★★

★★★★★

7 Reviews

The surface burner knob lets you control the heat of the surface burner on the range.

Samsung Microwave Oven Combo SPRING-KEY;-,HSWR,PI0.95

Samsung Microwave Oven Combo Thermostat

★★★★★

★★★★★

4 Reviews

This is a high limit thermostat designed for microwaves, ranges and ovens. Made of plastic and metal, this thermostat is designed to open the electrical circuit for your appliance when it reaches a specific internal temperature. In some cases, high limit thermostats can become defective and if your appliance will not turn on, or has a specific error code, it must be replaced. This thermostat is a genuine OEM part that is sold as an individual part and can be replaced by disconnecting the appliance from the power, and accessing its panel, usually located near the bottom of your range, or wherever the heating element is located. Reference your user manual for exact location and replacement instructions.

Samsung Microwave Oven Combo High-Voltage Diode

★★★★★

★★★★★

4 Reviews

This high-voltage diode is designed for use within various makes and models of microwaves and is a genuine OEM part that converts alternating current (AC) into direct current (DC). If you notice your microwave turns on and starts but does not heat anything, this diode is likely responsible. You can check the continuity of the diode with a multimeter before outright replacing it, but it is important to remember that doing any repairs on a microwave and dealing with sensitive electrical components should be done carefully and with the appropriate precautions to avoid any hazards. To replace the high-voltage diode in your microwave, disconnect it from power and allow it to discharge. Using the appropriate screwdrivers, gain access to the control panel of the microwave. Using an insulated screwdriver, release any electrical charge in the capacitor by touching it across the terminals. Then you can remove any hardware securing the diode, including the harness connecting it to the capacitor, which may be easiest done with pliers. Connect the new diode to the capacitor terminal and the securing bracket, and then reassemble your microwave before connecting it to power again.

Samsung Microwave Oven Combo Grease Filter

★★★★★

★★★★★

12 Reviews

This is a bottom-mounted air filter manufactured for a microwave. The microwave air filter filters the air flowing in and out of the microwave, and traps grease from the exhaust. A dirty or clogged filter can alter the taste and smell of your food or cause the appliance to be less efficient. This filter is approximately 13+ inches wide and 6 inches deep. This part is sold separately. No tools are required for this repair, the filter simply slides in and out of the underside of your microwave. It is an original part sourced from the authentic manufacturer.

Samsung Microwave Oven Combo Thermostat

★★★★★

★★★★★

2 Reviews

This is a high limit thermostat designed for use within various models of microwaves. The purpose of a high limit thermostat is to open the circuit of the appliance when the internal temperature reaches a certain threshold, to avoid becoming a safety hazard. If this thermostat fails or is damaged, it will cause your microwave to stop operating entirely. This is not to be confused with a thermal fuse, which is a one-time use component, whereas this high-limit thermostat resets once it drops back below operating temperatures. But if your microwave has repeatedly shut off, it is defective, or if the manufacturer recommends you replace it after it is triggered, it needs to be replaced immediately for safe operation. Consider inspecting your microwave for other component damage or factors that could lead to your microwave overheating, because that is what is causing this thermostat to be triggered. Replacing the high-limit thermostat will require a flathead and/or Philips-head screwdriver to remove the cover for the electronics of the microwave. First, you will want to unplug your microwave from the wall outlet and use your screwdriver to remove the side/top cover to give you access within it. Using your user manual, locate the thermostat within the main panel assembly and disconnect it from the wire harnesses, which may require a set of pliers. Here you can inspect it and any other components for visible burn damage. You can also test this thermostat for continuity with a multimeter, to see whether it is burnt out or perhaps defective. Install the new thermostat in place and reassemble your microwave, and you can now microwave safely.

Samsung Microwave Oven Combo GLASS-COOK TOP LAMP;-,GL

★★★★★

★★★★★

5 Reviews

The microwave light, or surface light lens, keeps the bulb in your microwave protected from getting cracked, scratched, and damaged. If your lens is defective or broken, or the bulb in your appliance is easily getting damaged, replacing the lens can be a solution. Refer to the installation instructions provided by the manufacturer for further guidance. Remember to unplug your appliance from the power source before starting this project, and wear gloves to ensure your hands are protected as a safety precaution.