Samsung Washer Parts

Samsung Appliance Parts

Popular Samsung Washer Parts

Your Price
$12.60
   In Stock
Samsung Washer Affresh Washing Machine Cleaner - 3 pack
★★★★★
★★★★★
2 Reviews
PartSelect Number PS1960673
Manufacturer Part Number W10135699
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Your Price
$89.85
   In Stock
Samsung Washer Drain Pump Assembly
★★★★★
★★★★★
4 Reviews
PartSelect Number PS12592631
Manufacturer Part Number DC97-19289F
The drain pump assembly removes water from the washer during the drain portion of the cycle.
Fixes these symptoms
Installation Instructions
Dieter from CHICAGO, IL
Easy instal, taking off entire back panels of appliance is required
Shut off water and electrical supply to appliance, take water supply hoses off to allow for proper access to back of machine.
Take off back panels of appliance. Disconnect two hoses from pump. Take out two screws which attach pump to washer body. Detach wiring which connects pump to control unit ( that takes a little time). Install pump in designated location, connect hoses, connect wiring to control unit, connect appliance to powere source, test run to make sure everything works properly, make final detailed wire connection Pump to control unit, install back panels, Connect water supply hoses .....and be proud of yourself!
Read more...
Your Price
$11.80
   In Stock
Samsung Washer Hose Clamp
★★★★★
★★★★★
1 Review
PartSelect Number PS11743008
Manufacturer Part Number WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Fixes these symptoms
Installation Instructions
jeff from lindenhurst, IL
Washing Machine was leaking water
Loosened the hose clamp, removed the injector valve and injector nozzle assembly, replaced both and tightened with new hose clamp. Fixed the problem for less than $20!! Washing machine is 20 years old and this was the first problem--hopefully it is now good for another 20 years! Read more...
Your Price
$23.05
   In Stock
Samsung Washer PULSATOR-CAP
★★★★★
★★★★★
14 Reviews
PartSelect Number PS8753312
Manufacturer Part Number DC66-00777A
This is a pulsator cap for various models of Samsung washing machines. This metal cap is designed to fit over the wash plate and agitator mounting bolt, ensuring clothes do not get caught on it during the washing cycle. If you notice your pulsator cap is missing or has come loose in the wash, it is critical that you replace it for your washing machine to operate safely. This pulsator cap is sold as an individual part and does not come with any accompanying accessories. Replacing this cap requires a flat-head screwdriver to pop off and remove the old one, and simply push on the new one.
Installation Instructions
James from GALLATIN, TN
The cap came off somehow
Just snapped on part in the center of tub where it belongs Read more...
Your Price
$123.10
   In Stock
Samsung Washer Door Lock Latch
★★★★★
★★★★★
23 Reviews
PartSelect Number PS11745016
Manufacturer Part Number WP8182634
This part is used on front load washers and includes the interlock switch assembly.
Fixes these symptoms
  • Door latch failure
  • Lid or door won’t close
  • Locking Issues
  • See more...
Installation Instructions
James from Vilonia, AR
front load washer latch replacement
1. remove the three screws from the top backside of the top panel
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using top opening.
7. reverse order to finish.
Read more...
Your Price
$13.62
   In Stock
Samsung Washer Bolt Assembly
PartSelect Number PS4217876
Manufacturer Part Number DC97-02412A
Assembly BOLT;SWF-P12,MOTOR/
Your Price
$136.66
   In Stock
Samsung Washer DOOR DIAPHRAGM;WF6000R,TPE,T2,ER7735DA,D
PartSelect Number PS12720638
Manufacturer Part Number DC64-03788A
This Samsung door diaphragm, commonly referred to as a door boot or door seal, is compatible with various models of Samsung washing machines. It is positioned around the opening of the washer where it creates a tight seal between the washer drum and door. This door diaphragm ensures that water does not leak out when the washer is running. It also helps to reduce the noise and vibrations produced by the washer during use. The most common sign of a faulty diaphragm is leaking underneath the washer door. The diaphragm will need to be replaced if it is visibly damaged or worn down.
Installation Instructions
Nadira from JACKSONVILLE, FL
Front loader door would not lock.
Removed the rear top two Phillips screws, pull off top cover. Unscrew two phillips screws that hold the outside front lock trim, unclip (one left of housing) plastic housing. Remove one phillips screw 11 o'clock from housing, about 6" away, with door button above it, which releases the door lock housing from inside the machine. From right side (facing machine) look down into left front of machine, you will see a black cover, which does a goid job hiding the white part, but it protects the part from water, I guess. Unclip 3-4 plugs, push spinning loader away to pull out the complete part easily. Swap back covers (a bit annoying to place wiring harness back in such a tight place, and cover on. You can try another method if you have a simpler way, like place the harness onto part first, before plugging in and placing cover. But, I kept dropping the part into the machine, which equals a little pita). Then screw the 11pm screw to hold part and the two other screws (small housing and cover), place remaining 2 screws, and lid. Pretty much undo the above procedure. Done. Read more...
Your Price
$34.13
   In Stock
Samsung Washer Door Switch Assembly
★★★★★
★★★★★
3 Reviews
PartSelect Number PS4210737
Manufacturer Part Number DC64-00519B
This is a door switch assembly designed for Samsung washing machines. This door switch assembly is used to latch and lock the door shut before the washing cycle commences and communicates with the control board when that is done. If your washer door is not locking or latching properly, the door switch is likely bad or broken and will need to be replaced. To replace this assembly, you will need a flat-head and Philips-head screwdriver. This part is a genuine OEM switch assembly and is sold individually, without any wire harnesses or securing screws.
Fixes these symptoms
Your Price
$17.35
   In Stock
Samsung Washer Outer Seal Clamp
★★★★★
★★★★★
3 Reviews
PartSelect Number PS4218211
Manufacturer Part Number DC97-04973B
This is an outer seal clamp for the washer door boot of your Samsung washing machine. This clamp tightly seals the boot of the drum within the door of the washer to prevent leaks. This clamp is made of metal and features a spring in the middle, but over time can be worn down or break, and result in water leaking out of the washing machine and into your home. Replacing this clamp will require a screwdriver, pliers, and safety gloves. This clamp is an OEM part that comes individually, without any other parts or accessories.
Fixes these symptoms
Your Price
$11.94
   In Stock
Samsung Washer Hex Head Bolt
★★★★★
★★★★★
1 Review
PartSelect Number PS4205366
Manufacturer Part Number DC60-40137A
This part is used for the shaft on the rear of the tub and is sold individually. The head bolt is part of the spider arm assembly, and they are generally changed at the same time. If you are replacing the entire spider arm assembly, make sure you order as many hex bolts as you will need. The spider arm assembly contains 6 of these hex bolts. The hex bolt or spider arm assembly may need to be replaced if you notice that your inner tub is going out of balance. The hex bolt measures 1.5 by 0.5 inches.
Installation Instructions
Samuel from NEEDVILLE, TX
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in. Read more...

Samsung Washer Appliance Types

Popular Samsung Washer Models

Below are the most popular Samsung Washer models we have. Enter your model number in the search box to find your model.