Troy-Bilt Cultivator Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Troy-Bilt Cultivator Parts
Your Price
$3.99
In Stock
Troy-Bilt Cultivator Carriage Bolt, 5/16-18 x .75
PartSelect Number PS10001568
Manufacturer Part Number 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Your Price
$3.99
In Stock
Troy-Bilt Cultivator Nut, Flange Lock, 5/16-18, Grf
PartSelect Number PS9092936
Manufacturer Part Number 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location.
While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations.
Customers rate this repair as Easy.
Your Price
$3.99
In Stock
Your Price
$5.53
In Stock
Your Price
$3.99
In Stock
Troy-Bilt Cultivator Hex L-Nut 5/16-18 Thd.
PartSelect Number PS9164517
Manufacturer Part Number 912-0158
Your Price
$3.99
In Stock
Troy-Bilt Cultivator Nut, Flange Lock, 1/4-20, Grf
PartSelect Number PS9299574
Manufacturer Part Number 712-04064
Also referred to as a Lock Nut or Flange Lock, this nut is designed for use with various lawn and garden equipment. The purpose of this part is to hold parts in place while resisting loosening when properly threaded. It is sold individually, not as part of a kit or assembly. It is black, made of metal, and is found in a variety of locations. Refer to your owners manual to determine if this is the correct part.
This part will need to be replaced when it is weak or broken. The symptoms experienced when this part breaks will depend on its location. You will need pliers to complete this repair.
Customers rate this repair as Easy.
Your Price
$27.39
In Stock
Troy-Bilt Cultivator Lawn Mower Ground Drive Belt
PartSelect Number PS9172714
Manufacturer Part Number 954-04032B
3/8 x 36-1/8-inch
This ground drive belt (part number 954-04032B) is for lawn mowers.
Ground drive belt 954-04032B drives the transmission, which propels the lawn mower wheels.
Wear work gloves to protect your hands when installing this part.
Your Price
$4.99
Special Order
Your Price
$9.62
In Stock
Troy-Bilt Cultivator Fuel Pick-Up Line with Filter
PartSelect Number PS10014339
Manufacturer Part Number 791-182353
The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated "Easy" to install and only requires a set of pliers.
Your Price
$10.48
In Stock
Troy-Bilt Cultivator Oil Seal-Wheel Shaft
PartSelect Number PS10027983
Manufacturer Part Number 921-04031
This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and requires a Screwdriver, Hammer, Washer, and Pipe to fit in the seal. If broken due to damage/fatigue, there will be a leak and the part should be replaced. Refer to your make, model, and diagrams to ensure this is the right part for you.
Troy-Bilt Cultivator Appliance Types
Related Troy-Bilt Cultivator Parts
- Troy-Bilt Cultivator Bearings
- Troy-Bilt Cultivator Spark Plugs
- Troy-Bilt Cultivator Wheels and Rollers
Popular Troy-Bilt Cultivator Models
Below are the most popular Troy-Bilt Cultivator models we have. Enter your model number in the search box to find your model.
- 21BA144R966 TB144 Cultivator
- 21BA144R966 TB144 Cultivator
- 12097 (S/N 0100101-UP) 2HP Tiller
- 21AT144R966 Tiller/Edger
- 21CA144R966 TB144 Cultivator
- 21AA144R966 TB144 Cultivator
- 21AT144R766 Tiller/Edger
- 21AT144R766 Tiller/Edger
- 34021 4HP-21" Single (ADJ.) Speed S.P. Mower
- 34022 5HP-21" Var. Speed S.P.
- 34023 5HP-21" Var. Speed S.P.
- 25A-128T063 Tiller/Edger
- 675-WUB 243cc Engine
- 1X65LUA 159cc Engine
- 21A-148H063 1.5HP
- 2003 Sweep Cultivator
- 10081 Edger-Cultivator Plus
- 5T65RU 140cc Engine
- 41AJGC-C766 Tbgc 41ajgc-C766 41ajgc-C766 Tbgc
- TB154 Electric Garden Cultivator
