Troy-Bilt Lawn Tractor Parts

Troy-Bilt Appliance Parts

Popular Troy-Bilt Lawn Tractor Parts

Your Price
$10.77
   In Stock
Troy-Bilt Lawn Tractor Clip-Hold Down (Nylon)
★★★★★
★★★★★
1 Review
PartSelect Number PS9903766
Manufacturer Part Number 1724869099
Hold-down clips, also known as retaining, locking or fastening clips, are designed to secure and fasten specific parts within equipment, and the use depends on the type and model. This hold down clip is used to secure the chute of various models of snowblowers, and is sold as an individual OEM part, without any securing hardware. Made of nylon, this clip secures to the chute with two screws and two washers. If you notice a wobbly or insecure chute resulting in excessive vibrations from the chute, check to make sure the clip is in-place before inspecting it for damage and ordering a replacement. To replace this clip, you will need to gain access to the chute, with either a screwdriver or wrench, and once you can access it, it is as simple as unscrewing the old clip and installing the new clip and rest of the assembly.
Your Price
$11.22
   In Stock
Troy-Bilt Lawn Tractor Throttle Cable
★★★★★
★★★★★
1 Review
PartSelect Number PS10009725
Manufacturer Part Number 753-06831
Your Price
$3.99
   In Stock
Troy-Bilt Lawn Tractor Carriage Bolt, 5/16-18 x .75
PartSelect Number PS10001568
Manufacturer Part Number 710-0451
This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the nut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.
Your Price
$3.99
   In Stock
Troy-Bilt Lawn Tractor Nut, Flange Lock, 5/16-18, Grf
PartSelect Number PS9092936
Manufacturer Part Number 712-04063
This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.
Your Price
$4.99
   In Stock
Troy-Bilt Lawn Tractor Hex Wash. Scr. 1/4-14 x .625" Lg.
PartSelect Number PS10001824
Manufacturer Part Number 710-0896
Installation Instructions
Laurie from RICHLANDS, NC
Oil Drain Sleeve
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s Read more...
Your Price
$7.99
   On Order
Troy-Bilt Lawn Tractor Oil Drain Sleeve
★★★★★
★★★★★
1 Review
PartSelect Number PS9301040
Manufacturer Part Number 731-05628
Your Price
$43.06
   On Order
Troy-Bilt Lawn Tractor Chute Assembly
PartSelect Number PS16388457
Manufacturer Part Number 631-04354C
Your Price
$3.99
   In Stock
Troy-Bilt Lawn Tractor Bow Tie Cotter Pin
PartSelect Number PS9096195
Manufacturer Part Number 714-04040
Sourced directly from the manufacturer, this replacement part is designed to secure otherwise loose parts in place, allowing the machine to operate properly. This Bow Tie Cotter Pin is not part of a kit or assembly and is sold individually. It is silver, made of metal, and is used in a variety of models for various purposes. This part needs to be replaced when it is broken or damaged, or the threads have become stripped. Depending on their location, this part is known to wear with regular use. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.
Your Price
$8.64
   In Stock
Troy-Bilt Lawn Tractor Battery Bracket
PartSelect Number PS9130645
Manufacturer Part Number 783-04869A-0637
Your Price
$4.99
   In Stock
Troy-Bilt Lawn Tractor Bell. Wash. .340 I.D. x .872 O.D.
PartSelect Number PS10006541
Manufacturer Part Number 736-0242
Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damaged, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

Troy-Bilt Lawn Tractor Appliance Types

Related Troy-Bilt Lawn Tractor Parts

Popular Troy-Bilt Lawn Tractor Models

Below are the most popular Troy-Bilt Lawn Tractor models we have. Enter your model number in the search box to find your model.