Official Uni Cooktop Parts

Your Price

$12.59

Uni Cooktop Drip Bowl - 8"

★★★★★

100 Reviews

PartSelect Number PS437595

Manufacturer Part Number 316048413

This chrome drip bowl is designed for use with electric cooktops and ranges. This drip bowl is sold individually. At the widest point this part has a diameter of approximately 10 inches. It sits beneath the surface burner element. It catches any drips or spills coming from the cookware on your burner. Because the cooktop is a high-traffic area of the kitchen, these bowls often get damaged, or get so dirty they can no longer be adequately cleaned. When replacing this part you need to remove the burner element. While you have it out we recommend inspecting the terminals and the element for any corrosion, arcing, or discoloration. Any of those things could be a sign of a bigger problem, and it indicates that the element and terminal block should be replaced.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from Nisswa, MN

Old pans/bowls were corroded

Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! Read more...

Chrome Drip Bowl - 6" – Part Number: 316048414

Your Price

$7.46

Uni Cooktop Chrome Drip Bowl - 6"

★★★★★

78 Reviews

PartSelect Number PS437596

Manufacturer Part Number 316048414

The drip bowl catches grease and spills that come from cooking on your stove top. They are located under the heating elements. Drip bowls are often neglected and can become rusted and cracked. If your drip bowl is damaged, it could allow grease, food, or other spills to drip inside your range. This could become a fire hazard. This 6 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned off and cool to the touch. To replace the drip bowl, remove the element, replace the current drip bowl, and reattach the element. This part is sold individually.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from Nisswa, MN

Old pans/bowls were corroded

Very easy---simply unplug the burners, remove the old pans and replace with the new ones

I was extremely pleased with the easy ordering and prompt delivery of parts that actually fit as they should! Read more...

Videos!

Terminal Block Kit – Part Number: 5303935058

Your Price

$16.24

Uni Cooktop Terminal Block Kit

★★★★★

37 Reviews

PartSelect Number PS470125

Manufacturer Part Number 5303935058

This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.

Fixes these symptoms

Element will not heat
Oven not heating evenly
Will Not Start
See more...

Installation Instructions

Steven from Taylors, SC

rental property stove only had 2 working burners and bottom drawer off track

first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place Read more...

Videos!

Your Price

$24.35

Uni Cooktop CAP

★★★★★

5 Reviews

PartSelect Number PS11775705

Manufacturer Part Number 5304508442

The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.

Videos!

Your Price

$30.07

Uni Cooktop CAP

★★★★★

6 Reviews

PartSelect Number PS11775704

Manufacturer Part Number 5304508441

Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.

Videos!

Your Price

$37.89

Uni Cooktop CAP

PartSelect Number PS11775719

Manufacturer Part Number 5304508468

Burner Switch Kit – Part Number: 5303935086

Your Price

$40.14

Uni Cooktop Burner Switch Kit

★★★★★

8 Reviews

PartSelect Number PS470145

Manufacturer Part Number 5303935086

This is a burner switch kit, also known as the surface element control switch repair kit, for ranges. This burner switch kit sends voltage to the surface element coil and it controls the stove top surface burner. If the following symptoms occur, installing the switch could be the solution to the problem: surface element not heating, overheating, or inconsistent heating. Usually, if the element is not defective, that is a sign there is an issue with the switch. The kit comes with several insert sizes, and includes screws as well. The tools needed for this project are a nut driver, pliers, and screwdrivers.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

George from New Port Richey, FL

High heat reluctant to turn down.

Most of the job is simple fastener mechanics.
Use a nut driver or Phillips screwdriver. Remove rear panel.

Pull out control knob. If it is stuck, wrap a small rag around the back of it and pull the rag steadily.

Carefully match marked terminals on the replacement switch with those on original. Switch terminals may not be in the same location. Replace wires one for one, one at a time.

Carefully select the correct knob filler for the switch post. Several are supplied. Proceed with logic and measure the shaft length and the filler length and type to match. Read more...

Videos!